Monitors, Test Kits & Calibration Equipment
$51,372.00
Gasmet GT5000 Terra FTIR Multi Gas Analyzer
Gasmet GT5000 Terra FTIR Gas Analyzer The GT5000 Terra represents a next-generation gas analyzer ...
Gasmet GT5000 Terra FTIR Gas Analyzer The GT5000 Terra represents a next-generation gas analyzer combining high technology with ease of use and true robustness. This analyzer is specifically designed for demanding and active field and on the go use. It is lightweight and compact meaning that it can be easily carried as a backpack to the field with minimum effort. What is more, the analyzer allows simultaneous gas measurements while on the go.The analyzer is IP54 rated which proves the robustn...
$6,870.00
Hazcat 2.0 Pro Kit Industrial Chemical Narcotic...
Features:Easy to follow test proceduresOldest, most reliable detection products in the nationCont...
Features:Easy to follow test proceduresOldest, most reliable detection products in the nationContinuously perfecting the detection methodsTraining is DHS approved! Benefits:Easy to use – manual is easy for a non-chemist to followCost Effective – may eliminate costly, time consuming lab testingVersatile – identifies or categorizes over 1000 chemicalsFast – 20 minute typical on-site assay timesComplete – contains everything necessary for field testingRugged – carrying case designed specifically...
$297.00
Hazcat Cyanide-Sulfide Test Kit
Hazcat’s Cyanide Test –• FINDS cyanide in substances with a pH of 0-14 (a cyanide mixed with a n...
Hazcat’s Cyanide Test –• FINDS cyanide in substances with a pH of 0-14 (a cyanide mixed with a non-metallic acid precursor such as phosphorous pentoxide will have a pH of 0-1 but not release the cyanide until mixed with water)– Some cyanide salts are insoluble in water or have a neutral pH. These cyanides still react with acids & are hazardous: Copper-CN pH 7, mercuric-CN pH 8, silver-CN pH 8, zinc-CN pH 7 • FINDS cyanide in samples that test +ve as Oxidizers– Other tests state: “Sample...
$1,778.00
Hazcat Quickcat DOT Hazard Classificaton Kit
This Kit quickly enables the end-user to Classify unknown substances into their DOT Hazard Classi...
This Kit quickly enables the end-user to Classify unknown substances into their DOT Hazard Classification for proper labeling prior to transportation. Seven tests performed on an Unknown Substance will tell you if you have a Flammable Liquid, Flammable Solid, Dangerous when Wet, Oxidizer, Corrosive, Explosive, Spontaneously Combustible, Poison, or Radioactive material. The Quickcat DOT Hazard Classification Kit is an easy to use field hazard identification system for analyzing solid and li...
$1,878.00
Hazcat Quickcat RCRA Waste Characterization Kit
This Kit quickly enables the end-user to segregate hazardous wastes into their RCRA (resource ...
This Kit quickly enables the end-user to segregate hazardous wastes into their RCRA (resource conservation and recovery act) Waste Characteristics: Ignitibility, Toxicity, Reactivity and Corrosivity for proper Hazardous Waste Disposal. If a waste falls under more than one category the kit will identify that as well.
$230.00
HazTech Beilstein Test Kit for Chlorinated Solvent
The Beilstein test is a simple qualitative chemical test for organic halides. It was developed by...
The Beilstein test is a simple qualitative chemical test for organic halides. It was developed by Friedrich Konrad Beilstein. A copper wire is cleaned and heated in a Bunsen burner flame. Vapors from a sample to be tested are drawn into the torch air intake and pyrolyze. If the pyrolysis products contain halogen atoms (chlorinated solvents/pesticides, pcb’s, chlorinated degreasers/refrigerant oils, insulating fluids) they will react with the copper forming a copper halide and producing a bril...
$20.00
Vial with 12 wires. Flame Test Wires are constructed with 4mm Nichrome wire.
Vial with 12 wires. Flame Test Wires are constructed with 4mm Nichrome wire.
$1,178.00
Go the distance and save with this smart, simple and economical way to compliance.Simple operatio...
Go the distance and save with this smart, simple and economical way to compliance.Simple operation, with SmartSample pump. Honeywell BW™ Max XT ll reliably monitors up to four hazards and combines straightforward one-buttonoperation with our robust, motorized pump or intelligent, remote sampling.Ideal for confined spaces. Fully compatible with MicroDock II automatedtest calibration system.Features & Benefits:Monitors H2S, CO, O2 an combustibles.One button Operation with robust, motorized...
$452.00
Honeywell BW™ Solo is a easy to service single-gas detector with BLE connectivity that provides r...
Honeywell BW™ Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. Features & Benefits:• User-friendly operation• Easy-to-read display for multiple languages• Lightweight convenience• Ease of maintenance• Serviceability• The new 1-Series sensor for enhanced reliability• Connected Bluetooth Low Energy (B...
$345.00
Honeywell IntelliDox enabler kit
The IntelliDoX system combines smart docking modules and device management software to provide au...
The IntelliDoX system combines smart docking modules and device management software to provide automated instrument management for Honeywell BW™ Solo, Honeywell BW™ Ultra, BW™ MaxXTII, BW™ Clip Series, Honeywell BW™ Clip4 and Honeywell BW™ MicroClip Series gas detectors - helping you drive productivity, reliability and efficiency. You can set each module to do a bump test, reconfigure the detector’s high and low alarm set points, and more. Also use the software to analyze the data from each g...
$0.00
Honeywell RAE AreaRAE Plus Wireless Gas Monitor...
AreaRAE Plus is a wireless, transportable area monitor that can simultaneously detect toxic and c...
AreaRAE Plus is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic chemicals, and meteorological factors that affect the speed and direction of the gas. Monitor-Only Configuration Includes: AreaRAE Plus monitor with sensors, battery and wireless options as specified, and protective rubber boot and filter(s) installed • Power Adapter,AC/DC,90-264V Input,12VDC/7.5A 90W Output) • Power cord,AC,125V,10A,US Plug, 1.8m • Power cord,...
$0.00
Honeywell RAE AreaRAE Pro Wireless Gas Monitor ...
AreaRAE Pro is a wireless, transportable area monitor that can simultaneously detect toxic and co...
AreaRAE Pro is a wireless, transportable area monitor that can simultaneously detect toxic and combustible gases, volatile organic chemicals, and meteorological factors that affect the speed and direction of the gas. Monitor-Only Configuration Includes: AREARAE Pro monitor with sensors, battery and wireless options as specified, and protective rubber boot and filter(s) installed • Power Adapter,AC/DC,90-264V Input,12VDC/7.5A 90W Output) • Power cord, AC, 125 V, 10 A, US Plug, 1.8 m • Power c...
$3,436.00
Honeywell RAE AutoRAE 2 Controller
Simplify bump testing and calibration of your RAE Systems gas monitors with the AutoRAE 2. Versat...
Simplify bump testing and calibration of your RAE Systems gas monitors with the AutoRAE 2. Versatile and modular, it can be deployed as a single, stand-alone unit to calibrate one instrument at a time, or networked to support up to 10 units at once and calibrate for up to five distinct gases. One-touch bump testing and single-button operation for calibration make it easy to use. Upgradeable firmware protects your investment and ensures that it’s always up-to-date, while the standard SD card f...
$2,880.00
Honeywell RAE AutoRAE 2 Cradle for Handheld PID
The AutoRAE 2 for MultiRAE is an automatic test and calibration system from RAE Systems that...
The AutoRAE 2 for MultiRAE is an automatic test and calibration system from RAE Systems that allows bump tests and calibrations to be conducted with the simple press of a button. The MultiRAE cradle may be opereated as a standalone cradle or as part of a controller-based system. The AutoRAE 2 cradle includes the cradle, charger, and basic accessories. Demand flow regulators, tubing, and calibration gas are sold separately. Features: Automatic testing, calibration, charging, and records ...
$2,044.00
Honeywell RAE AutoRAE 2 Cradle for MicroRAE
Simplify compliance with the RAE Systems AutoRAE 2 automatic test and calibration system for Micr...
Simplify compliance with the RAE Systems AutoRAE 2 automatic test and calibration system for MicroRAE. Conduct bump tests and calibrations with one press of a button. Use the AutoRAE 2 cradle in standalone mode or integrated into a controller-based system. The AutoRAE 2 cradle includes the cradle, charger, and basic accessories. Demand flow regulators, tubing, and calibration gas are sold separately. Features: Automatic testing, calibration, charging, and records management Deployable as a s...
$2,880.00
Honeywell RAE AutoRAE 2 Cradle for MultiRAE Pum...
The AutoRAE 2 for MultiRAE is an automatic test and calibration system from RAE Systems that allo...
The AutoRAE 2 for MultiRAE is an automatic test and calibration system from RAE Systems that allows bump tests and calibrations to be conducted with the simple press of a button. The MultiRAE cradle may be operated as a standalone cradle or as part of a controller-based system. The AutoRAE 2 cradle includes the cradle, charger, and basic accessories. Demand flow regulators, tubing, and calibration gas are sold separately. Features: Automatic testing, calibration, charging, and records manage...
$2,064.00
Honeywell RAE AutoRAE 2 Cradle for QRAE 3
Simplify compliance with the RAE Systems AutoRAE 2 automatic test and calibration system for QRAE...
Simplify compliance with the RAE Systems AutoRAE 2 automatic test and calibration system for QRAE 3. Conduct bump tests and calibrations with one press of a button. Use the AutoRAE 2 cradle in standalone mode or integrated into a controller-based system. The AutoRAE 2 cradle includes the cradle, charger, and basic accessories. Demand flow regulators, tubing, and calibration gas are sold separately. Features: Automatic testing, calibration, charging, and records management Deployable as a sta...
$1,608.00
Honeywell RAE AutoRAE 2 Cradle for ToxiRAE Pro
The AutoRAE 2 Automatic Test and Calibration System for the ToxiRAE Pro from RAE System simplifie...
The AutoRAE 2 Automatic Test and Calibration System for the ToxiRAE Pro from RAE System simplifies bump testing and calibration compliance. With a press of the button, the AutoRAE 2 can take care of all calibration, testing, and recharging. The calibration station may operate as a standalone cradle or as part of a controller-based system. The AutoRAE 2 cradle includes the cradle, charger, and basic accessories. Demand flow regulators, tubing, and calibration gas are sold separately. Features:...
Can't find what you are looking for? We represent hundreds of suppliers and not every product is on this site. We will help you find the exact product you need. Call 973-584-8777 for assistance.